The electroplated finger bit for marble and bluestone is engineered to work its way through the stone aggressively. This allows high speeds to be achieved without overloading the machine. Different thicknesses can be processed with the same cutter. The standard lengths are 45mm, 80mm, and 120mm. The diameter of the bit is 20mm.
The red finger bit HS8 is designed for granite and engineered stone. It has 8 segments and can be used both with and without oscillation. The bit has a diameter of 20mm, and a standard length of 39mm.
The setup of the bit reduces vibrations to an absolute minimum. This not only improves the operator’s comfort, but also results in a longer lifespan of the bit and a lower load on the machine.
The white finger bit HS8DK is designed for all kinds of ceramic materials. It has 8 segments and can be used only without oscillation. The bit has a diameter of 18mm, and standard lengths of 29mm and 39mm.
This finger bit is extremely reliable and stays sharp until the end. Losing time resharpening is not required! Both the top and the bottom of the material will be razor-sharp with this finger bit.